Welcome Anonymous


 
Board index The Line-Up Board Mod Bless America

Mod Bless America

anyone know specs to a jpa 1065 cam ?

This is the place to “swap” stories, post results or announce event info about the largest class of racing machines on dirt.
Presented by RacinDirt.com

anyone know specs to a jpa 1065 cam ?

Postby imcamod11 » Mon Jan 03, 2011 1:58 pm

thanks in advance. Robert
aka Mr Colorado
I buy and sell used and new sportmods
imcamod11@gmail.com 9702505995
imcamod11
Contender
 
Posts: 150
Joined: Fri Oct 28, 2005 3:00 pm
Location: Western Colorado

Re: anyone know specs to a jpa 1065 cam ?

Postby dirt dobber » Mon Jan 03, 2011 5:00 pm

dirt dobber
Rookie Driver
 
Posts: 16
Joined: Tue Aug 26, 2008 7:21 pm

Re: anyone know specs to a jpa 1065 cam ?

Postby Racerdad63 » Mon Jan 03, 2011 5:14 pm

I don't even show a #1065 cam in their book, but if all else fails, call and talk to Jeff White at Jeff's Automotive (Part of Jeff's performance) and he can give it to you 903-868-1109
"LIVE LIKE YOU ARE DYING"
MODIFIED 02J
User avatar
Racerdad63
Contender
 
Posts: 112
Joined: Sun May 03, 2009 9:19 am
Location: Decatur, TX

opps jps 1016

Postby imcamod11 » Mon Jan 03, 2011 10:30 pm

dumbchit me.... it's a jpa - 1016 Is that one listed ? helps i put my reading glasses on... :oops:
aka Mr Colorado
I buy and sell used and new sportmods
imcamod11@gmail.com 9702505995
imcamod11
Contender
 
Posts: 150
Joined: Fri Oct 28, 2005 3:00 pm
Location: Western Colorado

Re: anyone know specs to a jpa 1065 cam ?

Postby MXRacer 7s Dad » Mon Jan 03, 2011 10:49 pm

That helps alot. JPA 1016 cam
valve lift (intake) .488 (exhaust) .508
.050 duration 234 244
SAE duration 303 313
lobe sep 112
cam lift .325 .339
Hope this helps
Eddie, Dad of #7 IMCA Southern Sport Mod
2008 Abilene Speedway IMCA Hobby Stock Champion
2004 & 2005 Abilene Speedway Jr Mini Champion
Wide open Till You See GOD Then Brake
http://www.stephenrobisonracing.com
MXRacer 7s Dad
Rookie Driver
 
Posts: 35
Joined: Sun Sep 27, 2009 1:02 pm

Re: anyone know specs to a jpa 1065 cam ?

Postby imcamod11 » Tue Jan 04, 2011 8:02 am

thank you . bought a used ssm with this cam and selling engine to a buddy of mine and nice to know cam specs.
aka Mr Colorado
I buy and sell used and new sportmods
imcamod11@gmail.com 9702505995
imcamod11
Contender
 
Posts: 150
Joined: Fri Oct 28, 2005 3:00 pm
Location: Western Colorado

Re: anyone know specs to a jpa 1065 cam ?

Postby MXRacer 7s Dad » Tue Jan 04, 2011 8:23 pm

Not sure what kind if vacuum it will pull @ 5000 ', but in Abilene @ 4deg cam timing with Rhodes lifters it pulls 15in. @ 1200 rpm. hope your friend has a good time with it.
Eddie, Dad of #7 IMCA Southern Sport Mod
2008 Abilene Speedway IMCA Hobby Stock Champion
2004 & 2005 Abilene Speedway Jr Mini Champion
Wide open Till You See GOD Then Brake
http://www.stephenrobisonracing.com
MXRacer 7s Dad
Rookie Driver
 
Posts: 35
Joined: Sun Sep 27, 2009 1:02 pm

Re: anyone know specs to a jpa 1065 cam ?

Postby off the chain » Tue Jan 04, 2011 9:56 pm

Hmmmmm looks like Jeff superman performance was copying Bullet cams......and they are still around and most helpful too!!
off the chain
Rookie Driver
 
Posts: 35
Joined: Fri May 29, 2009 10:47 am

Re: anyone know specs to a jpa 1065 cam ?

Postby imcamod11 » Tue Jan 04, 2011 10:05 pm

checked it before i pulled it .. 12 in barely... elev here affects these ssm cams for sure
aka Mr Colorado
I buy and sell used and new sportmods
imcamod11@gmail.com 9702505995
imcamod11
Contender
 
Posts: 150
Joined: Fri Oct 28, 2005 3:00 pm
Location: Western Colorado


Return to Mod Bless America



  • In total there are 7 users online :: 1 registered, 0 hidden and 6 guests (based on users active over the past 1 minute)
  • Most users ever online was 173 on Mon Jan 27, 2014 11:27 am
  • Users browsing this forum: marc200mph and 6 guests

Main Menu

Login

Who is online

Users browsing this forum: marc200mph and 6 guests